D-Link xstack DGS-3620 series Reference Manual page 660

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28PC:admin# show address_binding dhcp_snoop limit_rate ports 1:1-1:10
Command: show address_binding dhcp_snoop limit_rate ports 1:1-1:10
Port Rate Limit (pps)
------ ----------------
1:1 No Limit
1:2 No Limit
1:3 No Limit
1:4 No Limit
1:5 No Limit
1:6 No Limit
1:7 No Limit
1:8 No Limit
1:9 No Limit
1:10 No Limit
DGS-3620-28PC:admin#
53-19 config address_binding dhcp_snoop max_entry ports
Description
This command is used to specifiy the maximum number of entries which can be learned by the
specified ports. By default, the per port maximum entry is no limit.
Format
config address_binding dhcp_snoop max_entry ports [<portlist> | all] limit [<value 1-50> |
no_limit] {ipv6}
Parameters
<portlist> - Enter the list of ports to configure maximum number of entries.
all - Specifies all the ports to configure maximum number of entries.
limit - Specifies the maximum number of entries which can be learned by the specified ports.
<value 1-50> - Enter a maximum limit between 1 and 50.
no_limit - Specifies an unlimited number of entries.
ipv6 – (Optional) Specifies that the configuration is for IPv6 DHCP Snooping.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To set the maximum number of entries that ports 1 to 3 can learn to 10:
DGS-3620-28PC:admin#config address_binding dhcp_snoop max_entry ports 1-3 limit
10
Command: config address_binding dhcp_snoop max_entry ports 1-3 limit 10
Success.
Action
---------
-
-
-
-
-
-
-
-
-
-
655