D-Link xstack DGS-3620 series Reference Manual page 661

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28PC:admin#
53-20 config address_binding recover_learning ports
Description
This command is used to recover port learning.
Format
config address_binding recover_learning ports [<portlist> | all]
Parameters
<portlist> - Enter the list of ports to recover learning.
all - Specifies to recover learning for all ports.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure ports 1 to 3 to recover learning:
DGS-3620-28PC:admin#config address_binding recover_learning ports 1-3
Command: config address_binding recover_learning ports 1-3
Success.
DGS-3620-28PC:admin#
53-21 enable address_binding nd_snoop
Description
This command is used to enable ND snooping on the Switch.
Format
enable address_binding nd_snoop
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
656