D-Link xstack DGS-3620 series Reference Manual page 962

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Parameters
None.
Restrictions
None.
Example
To list all the static RP settings:
DGS-3620-28PC:admin# show pim static_rp
Command: show pim static_rp
PIM Static RP Table
Group
------------------ ------------------
224.1.2.0/24
239.1.1.0/24
Total Entries: 2
DGS-3620-28PC:admin#
82-17 show pim rpset
Description
This command is used to list all the RPset information.
Format
show pim rpset {group <group>}
Parameters
group – Specifies the group address to display the chosen rendezvous point (RP) information.
<group> - Enter the group address here.
Restrictions
None.
Examples
This example shows how to list all the RPset information:
DGS-3620-28PC:admin# show pim rpset
Command: show pim rpset
PIM RP-Set Table
RP Address
10.52.33.4
10.52.33.18
957