D-Link xstack DGS-3620 series Reference Manual page 1116

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Command: create sflow counter_poller ports 1 analyzer_server_id 1
Success.
DGS-3620-28PC:admin#
100-13 config sflow counter_poller ports
Description
This command is used to configure the sflow counter poller parameters. If a user wants to change
the analyzer server ID, they need to delete the counter poller and create a new one.
Format
config sflow counter_poller ports [<portlist> | all] interval [disable | <sec 20-120>]
Parameters
<portlist> - Enter the ports to be configured.
all - Specifies to configure all ports.
interval - Specifies the maximum number of seconds between successive samples of the
counters. If set to disabled, the counter sample is disabled.
disable - Specifies to disable the interval.
<sec 20-120> - Enter the interval, in seconds, between 20 and 120.
Restrictions
Only Administrators and Operators can issue this command.
Example
To configure the sFlow counter poller parameters interval to 50 for port 1:
DGS-3620-28PC:admin#config sflow counter_poller ports 1 interval 50
Command: config sflow counter_poller ports 1 interval 50
Success.
DGS-3620-28PC:admin#
100-14 delete sflow counter_poller ports
Description
This command is used to delete the sFlow counter poller.
Format
delete sflow counter_poller ports [<portlist> | all]
1111