D-Link xstack DGS-3620 series Reference Manual page 1113

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Restrictions
Only Administrators and Operators can issue this command.
Example
To create the sFlow flow sampler:
DGS-3620-28PC:admin#create sflow flow_sampler ports 1 analyzer_server_id 1 rate
200 maxheadersize 120
Command: create sflow flow_sampler ports 1 analyzer_server_id 1 rate 200
maxheadersize 120
Success.
DGS-3620-28PC:admin#
100-9 config sflow flow_sampler ports
Description
This command is used to configure the sFlow flow sampler parameters.
Format
config sflow flow_sampler ports [<portlist> | all] {rate <value 0-65535> | tx_rate <value 0-
65535> | maxheadersize <value 18-256>}(1)
Parameters
<portlist> - Enter the list of ports to be configured.
all - Specifies to configure all ports.
rate - (Optional) Specifies the sampling rate for the received packets sampled on the port.
<value 0-65535> - Enter the sampling rate for received packet sampling. The configured rate
value multiplied by 256 is the actual rate. For example, if the rate is 20, the actual rate
5120. One packet will be sampled from every 5120 packets. If set to 0, the sampler is
disabled. If the rate is not specified, its default value is 0.
tx_rate – (Optional) Specifies the sampling rate for the transmitted packet sampled on the port.
<value 0-65535> - Enter the sampling rate for transmitted packet sampling. The configured
rate value multiplied by 256 is the actual rate. For example, if the rate is 20, the actual rate
5120. One packet will be sampled from every 5120 packets. If set to 0, the sampler is
disabled. If the rate is not specified, its default value is 0.
maxheadersize - Specifies the maximum number of leading bytes in the packet which has been
sampled that will be encapsulated and forwarded to the server.
<value 18-256> - Enter the maximum number of leading bytes in the packet which has been
sampled that will be encapsulated and forwarded to the server. If not specified, the default
value is 128.
Restrictions
Only Administrators and Operators can issue this command.
Example
To configure the sFlow flow sampler parameters:
1108