D-Link xstack DGS-3620 series Reference Manual page 446

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28PC:admin# show dhcpv6 binding
Command: show dhcpv6 binding
Pool Name: net90
Pool Name: net100-2
Total Entries : 2
DGS-3620-28PC:admin#
26-12 clear dhcpv6 binding
Description
This command is used to clear the DHCPv6 dynamic binding information.
Format
clear dhcpv6 binding {<pool_name 12>}
Parameters
<pool_name 12> - (Optional) Enter the DHCPv6 pool name used here. This name can be up to
12 characters long.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To clear the DHCPv6 dynamic binding information on the Switch:
DGS-3620-28PC:admin# clear dhcpv6 binding
Command: clear dhcpv6 binding
Success.
DGS-3620-28PC:admin#
26-13 enable dhcpv6_server
Description
This command is used to enable the DHCPv6 server function on the Switch
IPv6 Address: 3000:90:1::7
DUID : 0003000600cd14517000
Preferred(s): 120
IPv6 Address: 3000:100:1::1
DUID : 00030006001572200300
Preferred(s): 120
441
Valid(s): 240
Valid(s): 240