D-Link xstack DGS-3620 series Reference Manual page 1256

Layer 3 managed stackable gigabit switch
Hide thumbs Also See for xstack DGS-3620 series:
Table of Contents

Advertisement

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Format
ping6 [<ipv6addr> | <domain_name 255>] {times <value 1-255> | size <value 1-6000> |
timeout <sec 1-99> | source_ip <ipv6addr>}
Parameters
<ipv6addr> - Enter the IPv6 address of the host.
<domain_name 255> - Enter the domain name of the host. This name can be up to 255
characters long.
times - (Optional) Specifies the number of individual ICMP echo messages to be sent.
<value 1-255> - Enter the number of individual ICMP echo messages to be sent. A value of 0
will send an infinite ICMP echo messages. The maximum value is 255. The default is 0.
size - (Optional) Specifies the size.
<value 1-6000> - Enter the size. A value of 1 to 6000 can be specified. The default is 100.
timeout - (Optional) Specifies the time-out period while waiting for a response from the remote
device.
<sec 1-99> - Enter the time-out period while waiting for a response from the remote device. A
value of 1 to 99 can be specified. The default is 1 second.
source_ip - Specifies the source IPv6 address of the ping packets. If specified, the IPv6 address
will be used as the packets' source IPv6 address that ping send to remote host.
<ipv6addr> - Enter the source IPv6 addres used here.
Restrictions
None.
Example
To send ICMP echo message to "3FFE:2::D04D:7878:66D:E5BC" for 10 times:
DGS-3620-28PC:admin#ping6 3FFE:2::D04D:7878:66D:E5BC times 10 size 6000 timeout
10
Command: ping6 3FFE:2::D04D:7878:66D:E5BC times 10 size 6000 timeout 10
Reply from 3FFE:2::D04D:7878:66D:E5BC, bytes=6000, time<10 ms
Reply from 3FFE:2::D04D:7878:66D:E5BC, bytes=6000, time<10 ms
Reply from 3FFE:2::D04D:7878:66D:E5BC, bytes=6000, time<10 ms
Reply from 3FFE:2::D04D:7878:66D:E5BC, bytes=6000, time<10 ms
Reply from 3FFE:2::D04D:7878:66D:E5BC, bytes=6000, time<10 ms
Reply from 3FFE:2::D04D:7878:66D:E5BC, bytes=6000, time<10 ms
Reply from 3FFE:2::D04D:7878:66D:E5BC, bytes=6000, time<10 ms
Reply from 3FFE:2::D04D:7878:66D:E5BC, bytes=6000, time<10 ms
Reply from 3FFE:2::D04D:7878:66D:E5BC, bytes=6000, time<10 ms
Reply from 3FFE:2::D04D:7878:66D:E5BC, bytes=6000, time<10 ms
Ping Statistics for 3FFE:2::D04D:7878:66D:E5BC
Packets: Sent =10, Received =10, Lost =0
DGS-3620-28PC:admin#
119-18
traceroute
Description
This command is used to trace a route between the switch and a given host on the network.
1251

Advertisement

Table of Contents
loading

Table of Contents