Config Ssl Cachetimeout - D-Link xstack DGS-3620 series Reference Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide

105-6 config ssl cachetimeout

Description
This command is used to configure the cache timeout value which is designed for the dlktimer
library to remove the session ID after expiration. In order to support the resume session feature,
the SSL library keeps the session ID on the web server, and invokes the dlktimer library to
remove this session ID by the cache timeout value. The unit of argument's value is second and its
boundary is between 60 (1 minute) and 86400 (24 hours). The default value is 600 seconds.
Format
config ssl cachetimeout <value 60-86400>
Parameters
cachetimeout - Specifies the SSL cache timeout value attributes. The SSL cache timeout value
must be between 60 and 86400 seconds. The default value is 600 seconds
<value 60-86400> - Enter the SSL cache timeout value attributes. The SSL cache timeout
value must be between 60 and 86400 seconds. The default value is 600 seconds.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure an SSL cache timeout value of 60:
DGS-3620-28PC:admin# config ssl cachetimeout 60
Commands: config ssl cachetimeout 60
Success.
DGS-3620-28PC:admin#
105-7 config ssl certificate chain
Description
This command is used to specify chain of certifications on the Switch.
Format
config ssl certificate chain [default | <cert_list>]
Parameters
default - Specifies to use the all certificates to constitute the SSL certificate chain.
<cert_list> - Specifies chain of certifications on the Switch.
Restrictions
Only Administrator-level users can issue this command.
1172