Show Snmp Groups - D-Link xstack DGS-3620 series Reference Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Username
---------------------------
initial
Total Entries : 1
DGS-3620-28PC:admin#

102-4 show snmp groups

Description
This command is used to display the names of groups on the switch, and the security model, level,
and the status of the different views.
Format
show snmp groups
Parameters
None.
Restrictions
None.
Example
To display the names of the SNMP groups on the switch:
DGS-3620-28PC:admin#show snmp groups
Command: show snmp groups
Vacm Access Table Settings
Group Name : public
ReadView Name : CommunityView
WriteView Name :
Notify View Name : CommunityView
Security Model : SNMPv1
Security Level : NoAuthNoPriv
Group Name : public
ReadView Name : CommunityView
WriteView Name :
Notify View Name : CommunityView
Security Model : SNMPv2
Security Level : NoAuthNoPriv
Group Name : private
ReadView Name : CommunityView
Group Name
---------------------------
initial
1125
VerAuthPriv
------------
V3 NoneNone