D-Link xstack DGS-3620 series Reference Manual page 688

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Example
To configure a JWAC user:
DGS-3620-28PC:admin#config jwac user 112233
Command: config jwac user 112233
Enter a old password:***
Enter a case-sensitive new password:***
Enter the new password again for confirmation:***
Success.
DGS-3620-28PC:admin#
54-21 delete jwac
Description
This command is used to delete JWAC users from the local database.
Format
delete jwac [user <username 15> | all_users]
Parameters
user - Specifies the user name to be deleted.
<username 15> - Enter the user name to be deleted. The user name can be up to 15
characters long.
all_users - Specifies all user accounts in the local database will be deleted.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete a JWAC user from the local database:
DGS-3620-28PC:admin#delete jwac user 112233
Command: delete jwac user 112233
Success.
DGS-3620-28PC:admin#
54-22 show jwac user
Description
This command is used to display JWAC users in the local database.
683