D-Link xstack DGS-3620 series Reference Manual page 1229

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Format
disable udp_helper
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable the UDP Helper function:
DGS-3620-28PC:admin# disable udp_helper
Command: disable udp_helper
Success.
DGS-3620-28PC:admin#
117-3 config udp_helper add ipif
Description
This command is used to add a UDP Helper server address for specific interface of Switch.
Format
config udp_helper add ipif <ipif_name 12> <ipaddr>
Parameters
ipif - Specifies the name of the IP interface that receives the UDP broadcast.
<ipif_name 12> - Enter the IP interface name used here. This name can be up to 12
characters long.
<ipaddr> - Enter the UDP Helper server IP address here.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To add a server address for System interface:
1224