D-Link xstack DGS-3620 series Reference Manual page 683

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28PC:admin#
54-14 config jwac virtual_ip
Description
This command is used to configure JWAC virtual IP addresses used to accept authentication
requests from an unauthenticated host. The virtual IP of JWAC is used to accept authentication
request from unauthenticated host. Only requests sent to this IP will get correct responses. This IP
does not respond to ARP requests or ICMP packets.
Format
config jwac virtual_ip <ipaddr> {url [<string 128> | clear]}
Parameters
<ipaddr> - Enter the IP address of the virtual IP.
url - (Optional) Specifies the URL of the virtual IP.
<string 128> - Enter the URL of the virtual IP.
clear - Clear the URL of the virtual IP.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure a JWAC virtual IP address of 1.1.1.1 to accept authentication requests from an
unauthenticated host:
DGS-3620-28PC:admin#config jwac virtual_ip 1.1.1.1
Command: config jwac virtual_ip 1.1.1.1
Success.
DGS-3620-28PC:admin#
54-15 config jwac update_server
Description
This command is used to add or delete a server network address to which the traffic from an
unauthenticated client host will not be blocked by the JWAC Switch. Any servers running ActiveX
need to be able to have access to accomplish authentication. Before the client passes
authentication, it should be added to the Switch with its IP address. For example, the client may
need to access update.microsoft.com or some sites of the Anti-Virus software companies to check
whether the OS or Anti-Virus software of the client are the latest; and so IP addresses of
update.microsoft.com and of Anti-Virus software companies need to be added in the Switch.
678