D-Link xstack DGS-3620 series Reference Manual page 669

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Upload DHCP Snooping Entry.................. Done.
DGS-3620-28PC:admin#
53-32 save dhcp_snoop_entry
Description
This command is used to save the DHCPv4 Snooping binding entries.
Format
save dhcp_snoop_entry
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To backup the binding entries:
DGS-3620-28PC:admin#save dhcp_snoop_entry
Command: save dhcp_snoop_entry
Success.
DGS-3620-28PC:admin#
53-33 config address_binding dhcp snooping ports
Description
This command is used to configure the DHCP snooping rate limit state.
Format
config address_binding dhcp snooping ports [<portlist> | all] limit [rate {<value 1-2048>
mode [drop | shutdown]} | no_limit]
Parameters
<portlist> - Specifies list of ports to be configured.
all - Specifies to configure all ports.
limit - Specifies the reate limit.
rate - The number of DHCP messages that an interface can receive per second.
<value 1-2048> - (Optional) Enter the value between 1 and 2048.
mode - (Optional) Specifies the DHCP protection mode. The default is shutdown.
664