D-Link xstack DGS-3620 series Reference Manual page 574

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Example
To add an IGMP snooping profile to a multicast VLAN group with the name "v1":
DGS-3620-28PC:admin#config igmp_snooping multicast_vlan_group v1 add
profile_name channel_1
Command: config igmp_snooping multicast_vlan_group v1 add profile_name
channel_1
Success.
DGS-3620-28PC:admin#
46-8 show igmp_snooping multicast_vlan_group
Description
This command allows group profile information for a specific multicast VLAN to be displayed.
Format
show igmp_snooping multicast_vlan_group {<vlan_name 32>}
Parameters
<vlan_name 32> - (Optional) Specifies the name of the group profile's multicast VLAN to be
displayed.
If no parameter is specified, the system will display all multicast VLAN groups.
Restrictions
None.
Example
To display all IGMP snooping multicast VLANs'group profile information:
DGS-3620-28PC:admin#show igmp_snooping multicast_vlan_group
Command: show igmp_snooping multicast_vlan_group
VLAN Name
-------------------------------
test2
test1
DGS-3620-28PC:admin#
VLAN ID Multicast Group Profiles
------- ---------------------------------
20
100
569