D-Link xstack DGS-3620 series Reference Manual page 908

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
78-9 show ospf area
Description
This command is used to display an OSPF area's configuration.
Format
show ospf area {<area_id>}
Parameters
<area_id> - (Optional) Enter the OSPF area ID used here.
Restrictions
None.
Example
To display OSPF area's configuration:
DGS-3620-28PC:admin# show ospf area
Command: show ospf area
OSPF Area Settings
Area ID Type
--------------- ------ ----------------------- ----------------- ---------
0.0.0.0 Normal None
1.1.1.1 Normal None
4.4.4.4 Normal None
5.5.5.5 Stub
Total Entries : 4
DGS-3620-28PC:admin#
78-10 create ospf host_route
Description
This command is used to create an OSPF host route.
Format
create ospf host_route <ipaddr> {area <area_id> | metric <value 1-65535>}
Parameters
<ipaddr> - Enter the host's IP address used here.
area - (Optional) Specifies a 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that
uniquely identifies the OSPF area in the OSPF domain.
Stub Import Summary LSA Stub Default Cost Translate
Enabled
903
None None
None None
None None
1 None