D-Link xstack DGS-3620 series Reference Manual page 714

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
ipv4 - (Optional) Specifies that the maximum number of IPv4 learned addresses should be
limited.
ipv6 - (Optional) Specifies that the maximum number of IPv6 learned addresses should be
limited.
max_group - (Optional) Specifies the maximum number of the multicast groups.
<value 1-1024> - The range is from 1 to 1024 or infinite.
infinite - Infinite is the default setting.
action - (Optional) Specifies the action for handling newly learned groups when the register is
full.
drop - The new group will be dropped.
replace - The new group will replace the oldest group in the register table.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure the maximum number of multicast groups that ports 1 and 3 can join to 100:
DGS-3620-28PC:admin# config max_mcast_group ports 1, 3 max_group 100
Command: config max_mcast_group ports 1, 3 max_group 100
Success.
DGS-3620-28PC:admin#
58-9 show max_mcast_group
Description
This command is used to display the maximum number of multicast groups that a port or VLAN
can join. If the IPv4 or IPv6 option is not specified, IPv4 is implied.
Format
show max_mcast_group [ports <portlist> | vlanid <vlanid_list>] {[ipv4 | ipv6]}
Parameters
ports - Specifies a range of ports to display the maximum number of multicast groups.
<portlist> - Enter a range of ports to be displayed.
vlanid - Specifies the VLAN ID for displaying the maximum number of multicast groups.
<vlanid_list> - Enter the VLAN ID of the VLAN here.
ipv4 - (Optional) Specifies to display the maximum number of IPv4 learned addresses.
ipv6 - (Optional) Specifies to display the maximum number of IPv6 learned addresses.
Restrictions
None.
Example
To display the maximum number of multicast groups for ports 1-2:
709