D-Link xstack DGS-3620 series Reference Manual page 434

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28PC:admin#show dhcpv6_relay
Command: show dhcpv6_relay
DHCPv6 Relay Global State : Disabled
DHCPv6 Hops Count Limit
DHCPv6 Relay Information Option 37 State : Disabled
DHCPv6 Relay Information Option 37 Check : Disabled
DHCPv6 Relay Information Option 37 Remote ID Type : Default
DHCPv6 Relay Information Option 37 Remote ID :
---------------------------------------------------------------
IP Interface
DHCPv6 Relay Status
Server Address
IP Interface
DHCPv6 Relay Status
Server Address
Total Entries : 2
DGS-3620-28PC:admin#
To show the DHCPv6 relay configuration of System interface:
DGS-3620-28PC:admin#show dhcpv6_relay ipif System
Command: show dhcpv6_relay ipif System
DHCPv6 Relay Global State : Disabled
DHCPv6 Hops Count Limit
DHCPv6 Relay Information Option 37 State : Disabled
DHCPv6 Relay Information Option 37 Check : Disabled
DHCPv6 Relay Information Option 37 Remote ID Type : Default
DHCPv6 Relay Information Option 37 Remote ID :
---------------------------------------------------------------
IP Interface
DHCPv6 Relay Status
Server Address
DGS-3620-28PC:admin#
25-7 config dhcpv6_relay option_37
Description
This command is used to configure the processing of Option 37 for the DHCPv6 relay function.
When the DHCPv6 relay Option 37 is enabled, the DHCP packet will be inserted with the Option
37 field before being relayed to server. The DHCP packet will be processed based on the behavior
defined in the check and remote ID type setting. When the state is disabled, the DHCP packet will
be relayed directly to server without further checks and inserted with the Option 37.
: 4
: System
: Enabled
:
: Interface1
: Enabled
:
: 4
: System
: Enabled
:
429