D-Link xstack DGS-3620 series Reference Manual page 1099

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
98-4 show backup
Description
This command is used to show the created schedule backup.
Format
show backup { config | log }
Parameters
config - specified "config" to display all of scheduled backup for configuration.
log - specified "log" to display all of scheduled backup for log.
If no parameter is specified, all the backup schedules for both configuration and log shall be
displayed.
Restrictions
None.
Example
To show all schedule backup:
DGS-3620-28PC:admin# show backup
Command: show backup
Backup Schedule Entry 1
Time Range : range_1
Type : log
Filename : log-1
State : Enabled
Backup Schedule Entry 2
Time Range : range_2
Type : configuration
Filename : config-1
State : Disabled
Total Entries：2
DGS-3620-28PC:admin#
98-5 create execute_config
Description
This command is used to create a schedule to execute the configuration on file system.
1094