Interface Atm - HP 6600 Command Reference Manual

Field
Line Error: 0 FERR, 0 LCV, 0
CERR, 0 FEBE
The brief information of
interface(s) under route mode
Link: ADM - administratively
down; Stby - standby
Protocol: (s) - spoofing
Interface
Link
Protocol
Main IP
Description
Cause
Related commands

interface atm

interface atm
Use interface atm to enter ATM interface view.
Syntax
interface atm interface-number
Views
System view
Default command level
2: System level
Parameters
interface-number: ATM interface number.
Examples
# Enter ATM 5/1/0 interface view.
Description
A line error occurs.
Brief information about Layer 3 interfaces.
Link status:
•
ADM—The interface has been administratively shut down. To recover its
physical state, perform the undo shutdown command.
•
Stby—The interface is operating as a backup interface. To view the
primary interface, use the display standby state command described in
High Availability Command Reference.
If the network layer protocol state of an interface is shown as UP, but its link
is an on-demand link or not present at all, its protocol attribute includes the
spoofing flag (an s in parentheses).
Abbreviated interface name.
Physical link state of the interface:
•
UP—The link is up.
•
ADM—The link has been administratively shut down. To recover its
physical state, use the undo shutdown command.
Protocol connection state of the interface: UP, DOWN, or UP(s).
Main IP address of the interface.
Description of the interface.
Cause of a DOWN physical link. If the port has been shut down with the
shutdown command, this field displays Administratively. To restore the
physical state of the interface, use the undo shutdown command.
58