HP 6600 Command Reference Manual page 42

Syntax
display port-group manual [ all | name port-group-name ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
2: System level
Parameters
all: Displays information about all port groups.
name port-group-name: Specifies the name of a port group, a string of 1 to 32 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If the all keyword is specified, this command displays the name and member Ethernet interfaces of each
port group on the device.
If a port group is specified, this command displays its name and member Ethernet interfaces.
If you do not specify the all keyword or any port group name, the command displays the name of each
port group on the device.
Examples
# Display the names of all port groups.
<Sysname> display port-group manual
The following manual port group exist(s):
group1
# Display detailed information about all port groups.
<Sysname> display port-group manual all
Member of group1:
GigabitEthernet4/0/1
Member of group2:
None
# Display detailed information about the port group named group1.
<Sysname> display port-group manual name group1
Member of group1:
GigabitEthernet4/0/1
group2
GigabitEthernet4/0/2
GigabitEthernet4/0/2
33
GigabitEthernet4/0/3
GigabitEthernet4/0/3