Shutdown; Threshold - HP 6600 Command Reference Manual

Examples
# Create the 155 Mbps channel OC-3 1 on the 622 Mbps channel OC- 1 2 2 on 2.5 Gbps E-CPOS
interface E-CPOS 2/0/0.
<Sysname> system-view
[Sysname] controller e-cpos2/0/0
[Sysname-E-Cpos2/0/0] oc-12 2
[Sysname-E-Cpos2/0/0-oc-12-2] oc-3 1
# Create 155 Mbps channel OC-3 2 on 622 Mbps E-CPOS interface E-CPOS 2/0/0.
<Sysname> system-view
[Sysname] controller e-cpos2/0/0
[Sysname-E-Cpos2/0/0] oc-3 2
[Sysname-E-Cpos2/0/0-oc-3-2]

shutdown

Use shutdown to shut down the current E-CPOS interface.
Use undo shutdown to bring up the current E-CPOS interface.
Syntax
shutdown
undo shutdown
Default
An E-CPOS physical interface is up.
Views
E-CPOS interface view
Default command level
2: System level
Usage guidelines
The shutdown command on an E-CPOS physical interface shuts down all its E3/T3 channels or POS
channels, and these channels stop transmitting and receiving data as a result. To bring them up, use the
undo shutdown command on the E-CPOS interface.
Examples
# Shut down the E-CPOS interface E-CPOS 2/0/0.
<Sysname> system-view
[Sysname] controller e-cpos 2/0/0
[Sysname-E-Cpos2/0/0] shutdown

threshold

Use threshold to set the SD or SF alarm threshold for the current E-CPOS interface.
Use undo threshold to restore the default.
Syntax
threshold { sd | sf } value
258