Display Packet-Drop Interface - HP 6600 Command Reference Manual

Related commands
interface

display packet-drop interface

Use display packet-drop interface to display information about packets dropped on an interface or
multiple interfaces.
Syntax
display packet-drop interface [ interface-type [ interface-number ] ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-type: Specifies an interface type.
interface-number: Specifies an interface number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If you do not specify an interface type, this command displays information about dropped packets on all
interfaces on the device.
If you only specify an interface type, this command displays information about dropped packets on the
specified type of interface.
If you specify both the interface type and interface number, this command displays information about
dropped packets on the specified interface.
Examples
# Display information about dropped packets on GigabitEthernet 4/0/1.
<Sysname> display packet-drop interface gigabitethernet 4/0/1
GigabitEthernet4/0/1:
Packets dropped by GBP full or insufficient bandwidth: 301
Packets dropped by FFP: 261
Packets dropped by STP non-forwarding state: 321
Packets dropped by Rate-limit: 143
Packets dropped by broadcast-suppression: 301
Packets dropped by unicast-suppression: 215
Packets dropped by multicast-suppression: 241
18