Display Counters Rate - HP 6600 Command Reference Manual

Interface
GE1/1
GE1/2
GE1/3
GE1/4
Overflow: more than 14 decimal digits(7 digits for column "Err").
--: not supported.
Table 1 Command output
Field
Interface
Total (pkts)
Broadcast (pkts)
Multicast (pkts)
Err (pkts)
Overflow: more than 14
decimal digits(7 digits for
column "Err").
--: not supported.

display counters rate

Use display counters rate to display traffic rate statistics over the last sampling interval.
Syntax
display counters rate { inbound | outbound } interface [ interface-type ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
inbound: Displays inbound traffic rate statistics.
outbound: Displays outbound traffic rate statistics.
interface-type: Specifies an interface type.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
Total(pkts) Broadcast(pkts)
100
0
Overflow
0
Description
Abbreviated interface name.
Total number of packets received or sent through the interface.
Total number of broadcast packets received or sent through the interface. On
an RPR physical port, all broadcast and multicast packets received or sent are
displayed as multicast packets.
Total number of multicast packets received or sent through the interface. On an
RPR physical port, all broadcast and multicast packets received or sent are
displayed as multicast packets.
Total number of error packets received or sent through the interface.
The command displays Overflow if any of the following applies:
•
The data length of an error statistic is greater than 7 decimal digits.
•
The data length of a non-error statistic is greater than 14 decimal digits.
The statistical item is not supported.
5
Multicast(pkts) Err(pkts)
100
0
Overflow
0
0 0
0 0
Overflow Overflow
0 0