Description - HP 6600 Command Reference Manual

Syntax
default
Views
E-CPOS interface view
Default command level
2: System level
Usage guidelines
CAUTION:
The default command might interrupt ongoing network services. Make sure you are fully aware of the
impacts of this command when you perform it on a live network.
This command might fail to restore the default settings for some commands for reasons such as command
dependencies and system restrictions. Use the display this command in interface view to identify these
commands, and then use their undo forms or follow the command reference to individually restore their
default settings. If your restoration attempt still fails, follow the error message instructions to resolve the
problem.
Examples
# Restore the default settings of E-CPOS interface E-CPOS 3/1/1.
<Sysname> system-view
[Sysname] controller e-cpos 3/1/1
[Sysname-E-Cpos3/1/1] default
This command will restore the default settings. Continue? [Y/N]:y

description

Use description to set the description for the E-CPOS interface.
Use undo description to restore the default.
Syntax
description text
undo description
Default
The description of an E-CPOS interface is interface name Interface, for example, E-Cpos2/0 Interface.
Views
E-CPOS interface view
Default command level
2: System level
Parameters
text: Interface description, a case-sensitive character string of 1 to 240 characters. The string can include
case-sensitive letters, digits, special characters such as tilde (~), exclamation point (!), at sign (@), pound
sign (#), dollar sign ($), percent sign (%), caret (^), ampersand sign (&), asterisk (*), left brace({), right
brace (}), left parenthesis ((), right parenthesis ()), left bracket ([), right bracket (]), left angle bracket (<),
252