Multicast-Suppression - HP 6600 Command Reference Manual

Views
Layer 2 Ethernet interface view
Default command level
2: System level
Parameters
across: Sets the MDI mode to across. In this mode, pins 1 and 2 are receive pins, and pins 3 and 6 are
transmit pins.
auto: Sets the MDI mode to auto. In this mode, the port negotiates pin roles with its peer.
normal: Sets the MDI mode to normal. In normal mode, pins 1 and 2 are transmit pins, and pins 3 and
6 are receive pins.
Examples
# Set GigabitEthernet 4/0/1 to operate in across MDI mode.
<Sysname> system-view
[Sysname] interface gigabitethernet 4/0/1
[Sysname-GigabitEthernet4/0/1] mdi across

multicast-suppression

Use multicast-suppression to set the multicast suppression threshold on an Ethernet interface, a
subinterface, or a group of Ethernet interfaces.
Use undo multicast-suppression to restore the default multicast suppression threshold.
Syntax
multicast-suppression { ratio | pps max-pps | kbps max-kbps }
undo multicast-suppression
Default
Ethernet interfaces do not suppress multicast traffic.
Views
Layer 2 Ethernet interface view, port group view
Default command level
2: System level
Parameters
ratio: Sets the multicast suppression threshold as a percentage of the maximum interface rate, in the
range of 1 to 100. The smaller the percentage, the less multicast traffic is allowed to be received.
pps max-pps: Specifies the maximum number of multicast packets that the Ethernet interface can receive
per second. The max-pps argument is in the range of 1 to 1488100 pps.
kbps max-kbps: Specifies the maximum number of kilobits of multicast packets that the Ethernet interface
can receive per second. The max-kbps argument is in the range of 1 to 1000000 kbps.
When the pps or kbps keyword is specified, and a suppression granularity larger than 1 is
•
specified on the device, the value of the pps or kbps keyword must be no smaller than, and an
integer multiple of, the granularity. The multicast suppression threshold value configured through
this keyword on an Ethernet interface might not be the one that actually takes effect. To display the
43