HP 6600 Command Reference Manual page 19

Table 4 Command output
Field
GigabitEthernet 4/0/0.1 current
state
Line protocol current state
Internet protocol processing
IP Packet Frame Type
Hardware Address
IPv6 Packet Frame Type
Output queue : (Urgent queue :
Size/Length/Discards)
Output queue : (Protocol queue :
Size/Length/Discards)
Output queue : (FIFO queuing :
Size/Length/Discards)
Last clearing of counters
Input
Output
# Display detailed information about Layer 2 interface GigabitEthernet 4/0/1.
<Sysname> display interface gigabitethernet 4/0/1
GigabitEthernet4/0/1 current state: UP
IP Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 0000-000f-0007
Description: GigabitEthernet4/0/1 Interface
Loopback is not set
Media type is twisted pair
port hardware type is 1000_BASE_T
100Mbps-speed mode, half-duplex mode
Description
State of the Ethernet subinterface:
•
DOWN ( Administratively )—The Ethernet subinterface was shut
down with the shutdown command. The interface is
administratively down.
•
DOWN ( Link-Aggregation interface down )—The Ethernet
subinterface is physically down because the aggregate interface
corresponding to the aggregation group to which the subinterface
belongs was shut down with the shutdown command.
•
DOWN—The Ethernet subinterface is administratively up but
physically down (possibly because no physical link is present or the
link has failed).
•
UP—The Ethernet subinterface is both administratively and
physically up.
Link layer state of the subinterface:
•
DOWN—The interface is physically down.
•
UP—The interface is physically up.
Disabled indicates that IP packets cannot be processed.
For an interface configured with an IP address, this field changes to
Internet Address is.
Encapsulation format for IPv4 packets.
MAC address corresponding to the subinterface.
Encapsulation format for IPv6 packets.
Packet statistics for the following output queues:
•
Urgent queues.
•
Protocol queues.
•
FIFO queues.
Time when the reset counters interface command was last used to clear
statistics on the subinterface.
If the command was never used since the device was started, this field
displays Never.
Input packet statistics.
Output packet statistics.
10