Display Controller E-Cpos - HP 6600 Command Reference Manual

right angle bracket (>), hyphen (-), underscore(_), plus sign (+), equal sign (=), vertical bar (|), back
slash (\), colon (:), semi-colon (;) quotation marks ("), apostrophe ('), comma (,), dot (.), and slash (/),
spaces, and other Unicode characters and symbols.
Examples
# Set the description for E-CPOS interface E-CPOS 3/1/1 to ecpos-interface.
<Sysname> system-view
[Sysname] controller e-cpos 3/1/1
[Sysname-E-Cpos3/1/1] description ecpos-interface

display controller e-cpos

Use display controller e-cpos to display information about the specified E-CPOS interface or all E-CPOS
interfaces if no E-CPOS interface is specified. The output of the command includes channel status
information and alarms and errors of the regenerator section, multiplex section, and high-order path.
Syntax
display controller e-cpos [ e-cpos-number ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
e-cpos-number: E-CPOS interface number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about all channels of interface E-CPOS 2/0/0.
<Sysname> display controller e-cpos 2/0/0
E-Cpos2/0/0 current state: DOWN
Description : E-Cpos2/0/0 Interface
Frame-format SDH, multiplex AU-3, clock master, loopback not set
BER thresholds: SD = 10e-6, SF = 10e-3
Tx: J0: 0x01
Rx: J0: 0x01
Regenerator section:
Alarm: none
Error: 0 BIP, 0 SEF
Multiplex section:
Alarm: none
Error: 0 BIP, 0 SEF
253