Clock - HP 6600 Command Reference Manual

undo cable
Default
Long haul mode applies, allowing of cable length mode adaptation. The long haul mode is adopted first.
If the cable is of short haul mode, the system switches to the short haul mode automatically.
Views
ATM E1/T1 interface view
Default command level
2: System level
Parameters
long: Long haul mode, with cable length in the range of 151 to 500 m (495 to 1640 ft).
short: Short haul mode, with cable length in the range of 0 to 150 m (0 to 495 ft).
Usage guidelines
To specify the short haul mode, use the cable short command.
Examples
# Set the cable mode of interface ATM 5/1/0 to long haul.
<Sysname> system-view
[Sysname] interface atm 5/1/0
[Sysname-Atm5/1/0] cable long
Related commands
frame-format

clock

Use clock to set the clock mode for an ATM E1/T1 interface.
Use undo clock to restore the default.
Syntax
clock { master | slave }
undo clock
Default
The clock mode is slave.
Views
ATM E1/T1 interface view
Default command level
2: System level
Parameters
master: Sets the clock mode as master.
slave: Sets the clock mode as slave.
61