Examples
# Enter Null 0 interface view.
<Sysname> system-view
[Sysname] interface null 0
[Sysname-NULL0]
Related commands
display interface null
reset counters interface loopback
Use reset counters interface loopback to clear statistics for a loopback interface.
Syntax
reset counters interface loopback [ interface-number ]
Views
User view
Default command level
2: System level
Parameters
interface-number: Number of the loopback interface, which can be the number of any existing loopback
interface. With this argument, the command clears statistics on a specified loopback interface.
Usage guidelines
Clear the existing statistics on the interface before starting to collect new traffic statistics.
If you do not specify the interface-number argument, this command clears the statistics on all loopback
interfaces.
Examples
# Clear statistics on loopback interface Loopback 5.
<Sysname> reset counters interface loopback 5
reset counters interface null
Use reset counters interface null to clear statistics on the null interface.
Syntax
reset counters interface null [ 0 ]
Views
User view
Default command level
2: System level
Parameters
0: Specifies a null interface by its number, which is fixed at 0.
269