ATM interface configuration commands
Common ATM interface configuration commands
bandwidth
Use bandwidth to set the intended bandwidth for an interface.
Use undo bandwidth to restore the default.
Syntax
bandwidth bandwidth-value
undo bandwidth
Views
ATM E1 interface view, ATM T1 interface view, ATM OC-3c interface view, ATM STM- 1 interface view
Default command level
2: System level
Parameters
bandwidth-value: Intended bandwidth for the interface, ranging from 1 to 4,294,967,295 kbps.
Usage guidelines
You can obtain the intended bandwidth of an interface by querying the ifspeed value of the MIB node
with third-party software.
The intended bandwidth is used for bandwidth monitoring of the network management, but does not
affect the actual bandwidth of the interface.
Examples
# Set the intended bandwidth to 1000 kbps for interface ATM 3/1/1.
<Sysname> system-view
[Sysname] interface atm 3/1/1
[Sysname-Atm3/1/1] bandwidth 1000
default
Use default to restore the default settings for an ATM interface.
Syntax
default
Views
ATM E1 interface view, ATM T1 interface view, ATM E3 interface view, ATM T3 interface view, ATM
OC-3c interface view, ATM STM- 1 interface view
54