Table of Contents

Advertisement

Parameters
oc-12: Configures the 622 Mbps E-CPOS interface or 622 Mbps channel to operate in channelized
mode.
oc-12c: Configures the 622 Mbps E-CPOS interface or 622 Mbps channel to operate in concatenated
mode.
Examples
# Configure the 622 Mbps interface E-CPOS 2/0/0 to operate in concatenated mode.
<Sysname> system-view
[Sysname] controller e-cpos2/0/0
[Sysname-E-Cpos2/0/0] using oc-12c
# Create 622 Mbps channel OC- 1 2 1 on 2.5 Gbps E-CPOS interface E-CPOS 2/0/0, and configure
OC- 1 2 1 to operate in concatenated mode.
<Sysname> system-view
[Sysname] controller e-cpos2/0/0
[Sysname-E-Cpos2/0/0] oc-12 1
[Sysname-E-Cpos2/0/0-oc-12-1] using oc-12c

using { oc-3 | oc-3c }

Use using oc-3 to configure the 155 Mbps E-CPOS interface or channel to operate in channelized mode,
where you can configure E3/T3 channels.
Use using oc-3c to configure the 155 Mbps E-CPOS interface or channel to operate in concatenated
mode, where you can create one 155 Mbps POS channel.
Use undo using to restore the default operation mode of the E-CPOS interface or channel.
Syntax
using { oc-3 | oc-3c }
undo using
Default
A 155 Mbps E-CPOS interface or channel operates in channelized mode.
Views
155 Mbps E-CPOS interface view, OC-3 view
Default command level
2: System level
Parameters
oc-3: Configures the 155 Mbps E-CPOS interface or 155 Mbps channel to operate in channelized mode.
oc-3c: Configures the 155 Mbps E-CPOS interface or 155 Mbps channel to operate in concatenated
mode.
Examples
# Configure the 155 Mbps interface E-CPOS 2/0/0 to operate in concatenated mode.
<Sysname> system-view
[Sysname] controller e-cpos2/0/0
260

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hsr6600

Table of Contents