HP 6600 Command Reference Manual page 18

Field
promiscuous mode not set
Output queue (Urgent queue:
Size/Length/Discards)
Output queue (Protocol queue:
Size/Length/Discards)
Output queue (FIFO queuing:
Size/Length/Discards)
Last clearing of counters
Last 300 seconds input rate
Last 300 seconds output rate
Input
Output
# Display operating status information and related statistics of Layer 3 Ethernet subinterface
GigabitEthernet 4/0/0.1.
<Sysname> display interface GigabitEthernet 4/0/0.1
GigabitEthernet4/0/0.1 current state: DOWN
Line protocol current state: DOWN
Description: GigabitEthernet4/0/0.1 Interface
The Maximum Transmit Unit is 1500
Internet protocol processing : disabled
IP Packet Frame Type: PKTFMT_ETHNT_2,
IPv6 Packet Frame Type: PKTFMT_ETHNT_2,
Output queue : (Urgent queuing : Size/Length/Discards)
Output queue : (Protocol queuing : Size/Length/Discards)
Output queue : (FIFO queuing : Size/Length/Discards)
Last clearing of counters:
0 packets input, 0 bytes, 0 drops
0 packets output, 0 bytes, 0 drops
Description
The interface is operating in non-promiscuous mode.
Output queue (current message number in the urgent queue, maximum
number of messages allowed in the urgent queue, and number of discarded
messages).
Output queue (current message number in the protocol queue, maximum
number of messages allowed in the protocol queue, and number of
discarded messages).
Output queue (current message number in the FIFO queue, maximum
number of messages allowed in the FIFO queue, and number of discarded
messages).
Time when the reset counters interface command was last used to clear the
interface statistics. If the command was never used since the device was
started, this field displays Never.
Average input rate over the last 300 seconds in Bps, bps, and pps.
The statistics polling interval, 300 seconds in this example, can be
configured by using the flow-interval command.
Average output rate over the last 300 seconds in Bps, bps, and pps.
The statistics polling interval, 300 seconds in this example, can be
configured by using the flow-interval command.
Input packets.
Output packets.
Hardware Address: 0023-89a4-0952
Hardware Address: 0023-89a4-0952
Never
9
0/100/0
0/500/0
0/75/0