Flow-Interval - HP 6600 Command Reference Manual

Field
Type
LowerLimit
UpperLimit
CtrMode
Status
Trap
Log
SwiNum

flow-interval

Use flow-interval to set the interface statistics polling interval.
Use undo flow-interval to restore the default interval.
Syntax
flow-interval interval
undo flow-interval
Default
The interface statistics polling interval is 300 seconds.
Views
System view
Default command level
2: System level
Parameters
interval: Sets the statistics polling interval, in seconds. It is in the range of 5 to 300 and must be a multiple
of 5. The default value is 300.
Usage guidelines
In system view, use the flow-interval command to set the statistics polling interval for all interfaces.
Description
Type of traffic subjected to storm control. Options include broadcast, multicast
and unknown unicast.
Lower storm control threshold, in pps, kbps, or percentage.
Upper storm control threshold, in pps, kbps, or percentage.
Protective action (block or shutdown) to take on the port when the upper
threshold is reached. If you have not configured any protective action, N/A is
displayed.
Packet forwarding status:
•
Normal—The port is forwarding traffic correctly.
•
Control—The port is in controlled mode (the actual mode depends on the
Ctrmode setting: block or shutdown).
Status of the storm control threshold event trap switch:
•
On—The port sends threshold event traps.
•
Off—The port does not send threshold event traps.
Status of the storm control threshold event log switch:
•
On—The port sends threshold event log messages.
•
Off—The port does not send threshold event log messages.
Number of times the forwarding state of the interface changes.
When the SwiNum count reaches 65,535, it automatically resets.
35