HP 6600 Command Reference Manual page 234

Table of Contents

Advertisement

undo fe3 e3-number { dsu-mode | subrate }
Default
For an FE3 channel, the DSU mode is 1 (Kentrox) and the subrate is 34010 kbps.
Views
CPOS interface view
Default command level
2: System level
Parameters
e3-number: Number of an E3 channel on the current CPOS interface, in the range of 1 to 3.
dsu-mode: Sets the data service unit (DSU) mode for fractional E3 (FE3).
DSU mode options:
Table 30 FE3 DSU mode options
Keyword
0
1
subrate sub-number: Sets the FE3 subrate, in the range of 1 to 34010 kbps.
Usage guidelines
FE3 (also called subrate E3) is a nonstandard E3 application. Available FE3 subrate ranges and the
number of subrate grades vary with vendors. You can use the fe3 command to configure your device to
be compatible with the FE3 DSU modes listed in
When you use the fe3 command, note the following:
The subrates available in the DSU mode set with the fe3 dsu-mode command are discrete and the
subrate set with the fe3 subrate command is approximate rather than exact. After you set a subrate,
the E3 interface works out the precise subrate (accurate to bps) closest to the approximate subrate
within the subrate range available in the specified DSU mode. This calculated precise subrate is the
one actually applied to the hardware circuit.
You can use the display interface serial interface-number:0 command to display the DSU mode,
configured subrate, actual rate, and baud rate of an E3 interface. The actual rate of the E3 interface
is the pure data bandwidth excluding the bandwidth for overhead bytes. The baud rate of the E3
interface, 34368 kbps, is the actual rate of the E3 circuit, including the bandwidth for the overhead
bytes.
Examples
# Configure E3 channel 1 on interface CPOS 2/0/0 to operate in DSU mode 1 and set its subrate to
500 kbps.
<Sysname> system-view
[Sysname] controller cpos 2/0/0
[Sysname-Cpos2/0/0] fe3 1 dsu-mode 1
[Sysname-Cpos2/0/0] fe3 1 subrate 500
DSU mode (vendor)
Digital Link
Kentrox
Subrate range
358 to 34010 kbps in steps of
358 kbps
500 to 24500 kbps in steps of
500 kbps; 34010 kbps
Table
30.
225
Table 30
lists the available FE3
Total number of
subrate grades
95
50

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hsr6600

Table of Contents