Ft3 - HP 6600 Command Reference Manual

Parameters
c-bit: Sets the framing format to C-bit.
m23: Sets the framing format to m23.
Examples
# Set the framing format of interface T3 2/0/0 to m23.
<Sysname> system-view
[Sysname] controller t3 2/0/0
[Sysname-T3 2/0/0] frame-format m23

ft3

Use ft3 to configure a CT3 interface to operate in the FT3 mode and set the DSU mode or the subrate.
Use undo ft3 to restore the default.
Syntax
ft3 { dsu-mode { 0 | 1 | 2 | 3 | 4 } | subrate number }
undo ft3 { dsu-mode | subrate }
Default
DSU mode 0 (the Digital Link mode) is adopted, and the subrate is 44210 kbps.
Views
CT3 interface (in FT3 mode) view
Default command level
2: System level
Parameters
dsu-mode: Specifies the FT3 (Fractional T3) DSU mode for a CT3 interface operating in FT3 mode. This
keyword can be followed by 0, 1, 2, 3, and 4.
0: Specifies the Digital Link mode, where the subrate is a multiple of 300746 bps and ranges from 300
to 44210 kbps (in other words, up to 147 rate levels are available).
1: Specifies the Kentrox mode, where the subrate is a multiple of 1500000 bps and ranges from 1500
to 35000 kbps. In this mode, the subrate can also be 44210 kbps (making a total of 57 subrate levels).
2: Specifies the Larscom mode, where the subrate is a multiple of 3157835 bps and ranges from 3100 to
44210 kbps (in other words, up to 14 subrate levels are available).
3: Specifies the Adtran mode, where the subrate is a multiple of 75187 bps and ranges from 75 to 44210
kbps (in other words, up to 588 subrate levels are available).
4: Specifies the Verilink mode, where the subrate is a multiple of 1578918 bps and ranges from 1500 to
44210 kbps (in other words, up to 20 subrate levels are available).
subrate number: Specifies the subrate for the CT3 interface. The number argument ranges from 1 to
44210 (in kbps).
172