Fe1 Cable; Fe1 Clock - HP 6600 Command Reference Manual

Examples
# Disable RAI detection on interface Serial 2/0/0.
<Sysname> system-view
[Sysname] interface serial 2/0/0
[Sysname-Serial2/0/0] undo fe1 alarm detect rai

fe1 cable

Use fe1 cable to set the cable length for an E1-F interface.
Use undo fe1 cable to restore the default.
Syntax
fe1 cable { long | short }
undo fe1 cable
Default
The long keyword applies.
Views
E1-F interface view
Default command level
2: System level
Parameters
long: Supports long cables.
short: Supports short cables.
Examples
# Set the cable length type on E1-F interface Serial 2/0/0 to short.
<Sysname> system-view
[Sysname] interface serial 2/0/0
[Sysname-Serial2/0/0] fe1 cable short

fe1 clock

Use fe1 clock to configure clock source for the E1-F interface.
Use undo fe1 clock to restore the default.
Syntax
fe1 clock { master | slave }
undo fe1 clock
Default
The clock source for the E1-F interface is line clock.
Views
E1-F interface view
123