T1 Unframed - HP 6600 Command Reference Manual

Syntax
t1 t1-number shutdown
undo t1 t1-number shutdown
Default
T1 channels are up.
Views
CPOS interface view
Default command level
2: System level
Parameters
t1-number: Number of a T1 channel on the CPOS interface, in the range of 1 to 84.
Usage guidelines
Disabling a T1 channel disables the serial interfaces formed on it.
Examples
# Shut down T1 channel 1.
<Sysname> system-view
[Sysname] controller cpos 2/0/0
[Sysname-Cpos2/0/0] t1 1 shutdown

t1 unframed

Use t1 unframed to set a T1 channel on the CPOS interface to operate in unframed mode.
Use undo t1 unframed to restore the default.
Syntax
t1 t1-number unframed
undo t1 t1-number unframed
Default
T1 operates in framed mode.
Views
CPOS interface view
Default command level
2: System level
Parameters
t1-number: Number of a T1 channel on the CPOS interface, in the range of 1 to 84.
Usage guidelines
Like E1 channels, T1 channels on CPOS interfaces support unframed (clear channel) mode and framed
(channelized) mode.
In unframed mode, a T1 channel can form a 1.544 Mbps serial interface without timeslot division.
•
This interface is named serial slot/card/t1-number:0.
239