8 Maintenance
8.4 Replacing the cap for adjusting knob
Required tools
100
EN
ACCUVAC Pro/ACCUVAC Lite
of the vacuum regulator
Watchmaker's screwdriver
3
1. Detach the cap (1) from the adjusting knob (2) of the vacuum
regulator with the watchmaker's screwdriver (3).
2. Place the cap (1) on the adjusting knob (2) of the vacuum
regulator.
When doing so, note: The black line on the cap must line up
with the white line on the adjusting knob.
1
2
1
2