Oracle EXADATA X6-2 Installation And Configuration Manual page 288

(For 12.2.1.1.0 and above) Change directory to the
b.
Make PXE build using:
c.
./makeImageMedia.sh -pxe -pxeout ImageName
This creates four files in the
• For 12.1.2.2.0 up to 12.2.1.1.0:
kernel: vmlinux-version-ImageName-{DL180|DL360}
initrd: initrd-version-ImageName-{DL180|DL360}.img
image: nfsimg-version-ImageName-{DL180|DL360}.tar
image: nfsimg-version-ImageName-{DL180|DL360}.tar.md5
• For 12.2.1.1.0 and above:
kernel: vmlinux-version-ImageName-{cell|compute}
initrd: initrd-version-ImageName-{cell|compute}.img
image: nfsimg-version-ImageName-{cell|compute}.tar
image: nfsimg-version-ImageName-{cell|compute}.tar.md5
For example:
# ./makeImageMedia.sh -pxe -pxeout test
Please wait. Calculating md5 checksums for cellbits ...
Calculating md5 checksum for exaos.tbz ...
Calculating md5 checksum for dbboot.tbz ...
Calculating md5 checksum for dbfw.tbz ...
Calculating md5 checksum for kernel.tbz ...
Calculating md5 checksum for ofed.tbz ...
Calculating md5 checksum for sunutils.tbz ...
Calculating md5 checksum for commonos.tbz ...
Calculating md5 checksum for debugos.tbz ...
Calculating md5 checksum for dbrpms.tbz ...
Calculating md5 checksum for exaosovs.tbz ...
Calculating md5 checksum for dbovsboot.tbz ...
Calculating md5 checksum for kernelovs.tbz ...
Calculating md5 checksum for ofedovs.tbz ...
Calculating md5 checksum for commonovsos.tbz ...
Calculating md5 checksum for debugosovs.tbz ...
Calculating md5 checksum for dbovsrpms.tbz ...
Calculating md5 checksum for sunovsutils.tbz ...
Calculating md5 checksum for dbvmboot.tbz ...
Calculating md5 checksum for ofedvm.tbz ...
Calculating md5 checksum for sunvmutils.tbz ...
Store filename of nfsimg tarball nfsimg-12.1.2.1.1-test-DL360.tar inside
initrd
Please wait. Making initrd ...
395853 blocks
Please wait. Calculating md5 checksums for boot ...
PXE NFS image:
DL360.tar
PXE NFS md5 sum: /root/imagemaker/dl360/./PXE/nfsimg-12.1.2.1.1-test-
DL360.tar.md5
PXE initrd:
DL360.img
PXE kernel:
Change the boot order using the ILOM to boot from PXE and then reboot to start
13.
the imaging process.
For example, from the Unix prompt on the host:
subdirectory:
./PXE
/root/imagemaker/dl360/./PXE/nfsimg-12.1.2.1.1-test-
/root/imagemaker/dl360/./PXE/initrd-12.1.2.1.1-test-
/root/imagemaker/dl360/./PXE/vmlinux-12.1.2.1.1-test-DL360
Chapter 5
Imaging a New System
or directory.
cell compute
5-76