Using Iso To Image A New System - Oracle EXADATA X6-2 Installation And Configuration Manual

See My Oracle Support note 1953915.1 for further details on how the elastic
configuration process works, and specific examples of how to apply customer IP
addresses to the rack.
Run
7.
names. There should be no nodes with "elasticNode" in the description.
Run the OEDA tool to deploy.
8.
[root] # ./install.sh -cf ../MAA-dm01.xml -l
1. Validate Configuration File
2. Setup Capacity-on-Demand
3. Create Virtual Machine
4. Create Users
5. Setup Cell Connectivity
6. Create Cell Disks
7. Create Grid Disks
8. Configure Alerting
9. Install Cluster Software
10. Initialize Cluster Software
11. Install Database Software
12. Relink Database with RDS
13. Create ASM Diskgroups
14. Create Databases
15. Apply Security Fixes
16. Install Exachk
17. Setup ASR Alerting
18. Create Installation Summary
19. Resecure Machine
Related Topics:
• Elastic Configuration on Exadata (My Oracle Support Doc ID 1953915.1)

5.8.3 Using ISO to Image a New System

To prepare a new Exadata system for deployment using ISO, perform the following
steps:
Obtain the latest Oracle Exadata Deployment Assistant (OEDA).
1.
Run the OEDA configuration tool to generate the configuration files.
2.
Power on all the servers.
3.
a.
b.
Run OEDA to generate the
4.
Connect to the first database node. You can do this by connecting a laptop to the
5.
ILOM serial management port (9600, 8, N, 1), and then connecting to the console
and log in to the database node.
Obtain the eth0 MAC address for each database node. This is the
6.
field from
a.
b.
and verify that all nodes show the correct IP addresses and host
ibhosts
Database nodes and cells will automatically assign to themselves unused IP
addresses on eth0 in the 172.16 range.
Host names of the nodes will be of the format
preconf.csv
in the ILOM (or through
/SYS/MB/NET0
Connect to the other database nodes using ssh from the console.
Run to get a list of node names and IP addresses.
ibhosts
Imaging a New System
, where N is a number.
nodeN
file that can be used to image the system.
if logged into the console).
ip addr
Chapter 5
fru_macaddress
5-68