Oracle EXADATA X6-2 Installation And Configuration Manual page 191

• : Specifies the short host name for the network
HOSTNAME
• : Specifies the IP address of the network
IP
• : Specifies the netmask of the network
NETMASK
• : Specifies the domain name of the network
DOMAINNAME
• : Specifies the master adapter name
MASTER
• : Specifies the network subnet gateway
GATEWAY
• : A Boolean variable where
SSHENABLED
this adapter
• : Specifies the MAC address
MAC
• : (Only for X7 2 socket compute nodes), either 10000 or 25000
NICSPEED
• : Specifies a space-separated list of slave devices for a bonded network,
SLAVE
enclosed in single quotes
• : (For Private networks only) Specifies the pkey
PKEY
• : (For Private networks only) Specifies the pkey name
PKEYNAME
• : Specifies the status of the network
STATUS
• : A Boolean variable where
LACP
• : Specifies the VLAN Id if network is a VLAN network and not private
VLANID
• : Specifies the NAT host name
NATHOSTNAME
• : Specifies the NAT IP address
NATIP
• : Specifies the NAT domain name
NATDOMAINNAME
• : Specifies the NAT netmask
NATNETMASK
The following arguments are available in the
• : Specifies the ID for the target network in the XML configuration file.
ID
• : Specifies the host name for an network object, not the machine
NETWORKHOSTNAME
host name
• : Specifies the NAT host name for an existing compute node
NATHOSTNAME
• : Specifies the host name for an existing compute node
HOSTNAME
• : Specifies the type of network, which can be
NETWORKTYPE
, ,
PRIVATE OTHER INGESTVIP
• : Specifies the ID of the private network
PRIVATEID
• : Specifies the cluster number in the XML configuration file, starting
CLUSTERNUMBER
at 1
• : Specifies the name of an existing cluster
CLUSTERNAME
• : Specifies the number of an existing compute node in the cluster,
COMPUTENUMBER
starting at 1
• : Specifies the number of an existing storage cell in the cluster,
STORAGENUMBER
starting at 1
indicates SSH should be enabled for
TRUE
indicates that LACP should be enabled
TRUE
clause:
WHERE
, , or .
REPLICATIONVIP ILOM
Chapter 3
OEDA Command Line Interface
, , ,
ADMIN CLIENT BACKUP
3-64