Hardware Selection Configuration Page; Rack Details Configuration Page; Customer Network Configuration Page - Oracle EXADATA X6-2 Installation And Configuration Manual

Table 3-2
Customer Details Field
Name Prefix
Region
Timezone

3.2.3 Hardware Selection Configuration Page

Select your hardware from the list on the left. The list on the right contains the
hardware for your environment.

3.2.4 Rack Details Configuration Page

Click the check box if you want to include a spine switch as part of the rack
configuration. Do this for each rack that will have a spine switch.

3.2.5 Customer Network Configuration Page

Table 3-3
network.
Table 3-3
Customer Details Field
Bonded/Non-Bonded
Subnet Mask
(Cont.) Customer Details Page
(page 3-8) lists the number of required IP addresses for the customer
Customer Network Configuration Page
OEDA Graphical User Interface
Description
Defines the prefix for network interfaces.
Note:
The prefix can contain any alphanumeric
character.
The prefix cannot contain spaces.
The maximum length is 20 characters.
The field cannot be empty.
The default is dm01.
Example:
A value of dm01 results in a database server
host name of dm01db01, and a storage server
host name of dm01cel01.
Sets the region for the rack.
Note:
Select a region from the list.
Sets the time zone where the rack will be
installed.
Note:
The time zones shown are based on the
selected region.
Description
Identifies type of network bonding.
Note: The Admin and InfiniBand networks are
non-bonded networks.
This field is not available on X7 systems.
Sets the IP address mask for the subnet.
Chapter 3
3-8