Modifying The Default Client Ethernet Network Names - Oracle EXADATA X6-2 Installation And Configuration Manual

Table 3-6
Client Ethernet Field
Defines the Hostname for the Compute Nodes Specifies that the adapter name defines the
Related Topics:
• Overview of Network Requirements
• Enabling 802.1Q VLAN Tagging in Exadata Database Machine over client
networks (My Oracle Support Doc ID 1423676.1)
• Implementing Tagged VLAN Interfaces in Oracle VM Environments on Exadata
(My Oracle Support Doc ID 2018550.1)

3.2.7.1 Modifying the Default Client Ethernet Network Names

Default client network names are usually changed to meet corporate naming
standards or compatibility with existing systems. The following table lists the client
network format mask fields.
Table 3-7
Client Network Format Masks Field
Client Access Name
Client Access Starting ID
VIP Name
VIP Starting ID
SCAN Details
(Cont.) Client Ethernet Page
Note:
• All fields must be filled in.
• The percent signs (%) in the names are replaced by the numbers entered
into the Starting ID fields.
Client Network Format Masks Page
OEDA Graphical User Interface
Description
host names for the database servers.
Note: This option is not usually selected for
the database servers.
(page 2-1)
Description
Assigns the client access name for this rack.
Note: The name contains alphanumeric
characters.
Assigns the starting numeric ID for the client
access name in this rack.
Assigns the VIP name for this rack.
Note: The name contains alphanumeric
characters.
Sets the starting numeric ID for the VIP name
in this rack.
Assigns the SCAN name for this rack.
Note: The name contains alphanumeric
characters.
Chapter 3
3-14