Non-Bonded Network Configuration For Oracle Exadata Database Machine X4-8 Full Rack; Non-Bonded Network Configuration For Oracle Exadata Database Machine X3-8 Full Rack And Oracle Exadata Database Machine X2-8 Full Rack - Oracle EXADATA X6-2 Installation And Configuration Manual

2.4.2.3 Non-bonded Network Configuration for Oracle Exadata Database
Machine X4-8 Full Rack
When using a non-bonded network configuration for Oracle Exadata Database
Machine X4-8 Full Rack, the database servers are configured as follows:
• Port NET0: Provides access to the operating system using the management
network through the ETH0 interface.
• Port NET1: Provides access to the database using the client access network
through the ETH1 interface. The Oracle RAC SCAN and VIP addresses are
defined on this interface.
• Port NET MGT: Provides access to the ILOM using the management network.
2.4.2.4 Non-bonded Network Configuration for Oracle Exadata Database
Machine X3-8 Full Rack and Oracle Exadata Database Machine X2-8 Full Rack
When using a non-bonded network configuration for Oracle Exadata Database
Machine X4-8 Full Rack, Oracle Exadata Database Machine X3-8 Full Rack and
Oracle Exadata Database Machine X2-8 Full Rack, the database servers are
configured as follows:
• Port NEM0/NET0: Provides access to the operating system using the
management network through the ETH0 interface. This network must use the 1
GbE port.
• Port NEM0/NET1: Provides access to the database using the client access
network through the ETH1 interface. The Oracle RAC SCAN and VIP addresses
are defined on this interface.
• Port NET MGT: Provides access to the Integrated Lights Out Manager (ILOM)
using the management network.
Note:
Oracle Exadata Database Machine X5-8, X6-8, and X7-8 have BONDIB0,
BONDIB1, and so on for the InfiniBand private network.
Note:
Oracle Exadata Database Machine X4-8 Full Rack has BONDIB0, BONDIB1,
and so on for the InfiniBand private network.
Chapter 2
Network Channel Bonding Support
2-18