Oracle EXADATA X6-2 Installation And Configuration Manual page 197

•
DOMAINNAME
• : Specifies the IP address for the VIP
IP
The following arguments are available in the
•
HOSTNAME
•
CLUSTERNUMBER
•
CLUSTERNAME
•
CLUSTERID
•
COMPUTENUMBER
Usage Notes
When adding a VIP to a compute node, the node must not already have a VIP defined.
3.3.3.15.2 ALTER VIP
This command alters the attributes of a VIP for an individual node in a cluster.
Syntax
ALTER VIP { NAME=vip_name | DOMAINNAME=domain_name |
IP=vip_ip_addr }
WHERE {
HOSTNAME = hostname |
CLUSTERNAME = cluster_name COMPUTENUMBER = compute_number |
CLUSTERNUMBER = cluster_number COMPUTENUMBER = compute_number |
CLUSTERID = cluster_id COMPUTENUMBER = compute_number }
Arguments
You can modify the following attributes for the VIP:
•
NAME
•
DOMAINNAME
• : Specifies the IP address for the VIP
IP
The following arguments are available in the
•
HOSTNAME
•
CLUSTERNUMBER
•
CLUSTERNAME
•
CLUSTERID
•
COMPUTENUMBER
3.3.3.15.3 DELETE VIP
This command removes a VIP from an individual node in a cluster.
Syntax
DELETE VIP
WHERE {
ID = vip_id |
: Specifies the domain name for the VIP
: Specifies the host name for the compute node in the cluster
: Specifies the cluster number in the
: Specifies the name of the cluster
: Specifies the
es.xml
: Specifies the compute node number in the cluster, starting at 1
: Specifies the short DNS name for the VIP
: Specifies the domain name for the VIP
: Specifies the host name for the compute node in the cluster
: Specifies the cluster number in the
: Specifies the name of the cluster
: Specifies the
es.xml
: Specifies the compute node number in the cluster, starting at 1
OEDA Command Line Interface
clause:
WHERE
es.xml
ID of the cluster
clause:
WHERE
es.xml
ID of the cluster
Chapter 3
, starting at 1
, starting at 1
3-70