Connection Settings - Omron NY532-5400 User Manual

7 Tag Data Link Functions
3
You can change tag set names in this dialog box. To confirm a change, click the Regist Button
in the Edit Tag Set Dialog Box.
4
Perform steps 1 to 3 for all the devices to import variables and to create tag sets.
7-2-5

Connection Settings

After you create the tag sets, click the Connections Tab at the top of the Edit Device Parameters Dia-
log Box, and set the following connection information.
• The target devices with which connections are opened
• The connection type (multi-cast or unicast)
• The length of the packet intervals (RPI)
• Connection name (optional)
Make the connections settings in the originator only. The connections settings are not necessary in the
target device.
Precautions for Correct Use Precautions for Correct Use
Make the connections settings after you create tag sets for all of the devices involved in tag data
links.
Connection Settings (Connections Tab Page)
 Registering Devices in the Register Device List
1
Double-click the icon of the device for which to make originator settings in the Network Configu-
ration Pane of the Network Configurator. The Edit Device Parameters Dialog Box is displayed.
Right-click the icon to display the pop-up menu, and select Parameter – Edit.
2
Click the Connections Tab in the Edit Device Parameters Dialog Box. All of the devices regis-
tered in the network (except the local node) are displayed.
7-32
NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User's Manual (W563)