Omron NY532-5400 User Manual page 337

Subtree name
ipNetToMediaTable
ipNetToMediaEntry
ipNetToMedi-
aIfIndex
ipNetToMedi-
aPhysAddress
ipNetToMedi-
aNetAddress
ipNetToMedia-
Type
ipRoutingDiscards
NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User's Manual (W563)
Standard [(identifier) attribute]
(22) NA
The IP address conversion table used to map IP
addresses to physical addresses.
(1) NA
Row data for the conversion table. The indices are
ipNetToMediaIfIndex and ipNetToMediaNetAd-
dress.
(1) RW
The interface ID number for this entry. The value
of ifIndex is used for this value.
(2) RW
The media-dependent physical address.
(3) RW
The IP address that corresponds to the media-
dependent physical address.
(4) RW
The address conversion method.
Other (1): A method other than the following
items.
Invalid (2): An invalid value.
Dynamic (3): Dynamic conversion.
Static (4): Static conversion.
(23) RO
The number of routing entries that were valid but
discarded. For example, if there was not enough
buffer space because of other routing entries.
12 SNMP Agent
Implementation
Support
specifications
--- ---
--- ---
Sup- According to the
ported. standard.
Sup- According to the
ported. standard.
Sup- According to the
ported. standard.
Sup- According to the
ported. standard.
Sup- According to the
ported. standard.
12-13
12