7 Tag Data Link Functions
7-2-8
Connecting the Network Configurator to the Network
This section describes how to Connect the Network Configurator online.
Connecting through Ethernet
Connect to the built-in EtherNet/IP port on the Controller via an Ethernet switch.
Precautions for Correct Use
Precautions for Correct Use
The first time you connect via Ethernet with Windows XP (SP2 or higher), Windows Vista, or
Windows 7, you much change the Windows firewall settings. For the procedure, refer to A-4 Pre-
cautions for Using the Network Configurator on Windows XP, Windows Vista, or Windows 7 or
Higher.
1
Select Option - Select Interface - Ethernet I/F.
2
Select Network - Connect. If there are multiple Ethernet interfaces on the computer, the Select
Connect Network Port Dialog Box is displayed. Select the interface to connect, and press the
OK Button.
The following dialog box is displayed.
7-48
NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User's Manual (W563)