Direct Connection via Ethernet to Built-in EtherNet/IP Port
Use the following procedure to directly connect to the built-in EtherNet/IP port via Ethernet. You can
connect to the built-in EtherNet/IP port even if the IP address has not been set on the computer.
1
Select the communications interface.
Select Option - Select Interface - NJ/NX/NY Series Ethernet Direct I/F.
2
Select Network - Connect and click the OK Button.
The Setup Interface Dialog Box is displayed if there are several Controllers that you can con-
nect to.
3
Select the Interface Card to connect and click the OK Button.
Select from the options displayed as Controller model (IP number). The following dialog box is
displayed.
4
Select TCP:2 and then click the OK Button.
The following dialog box is displayed.
NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User's Manual (W563)
7 Tag Data Link Functions
7
7-51