Omron NY532-5400 User Manual page 435

2
Open the Administrative Tools and select Windows Firewall with Advanced Security from the
dialog box that is displayed.
3
Select Inbound Rules under Windows Firewall with Advanced Security on Local Computer on
the left side of the Windows Firewall with Advanced Security Dialog Box.
4
Select New Rule under Inbound Rules in the Actions Area on the right side of the dialog box.
5
Make the following settings for each step in the New Inbound Rule Wizard Dialog Box, and click
the Next Button to move between steps.
Rule Type
Program
Protocol and support
Scope
Action
Profile
Name
6
Click the Finish Button. The rule that you defined will be registered in the Inbound Rules (e.g.,
Omron_EIP).
Close the Windows Firewall with Advanced Security Dialog Box.
7
When you attempt to connect to the NY-series Controller from the Network Configurator, the
Windows Security Warning Dialog Box is displayed.
NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User's Manual (W563)
Select Custom.
Select All Programs.
Select ICMPv4 as the protocol type.
Select Any IP address for everything.
Select Allow the connection.
Select Domain, Private, and Public.
Enter any name, e.g., Omron_EIP.
Appendices
A
A-49